- Inlet: 3/4" FNPT
- Outlet: 3/4" FNPT
- Capacity in BTU/H LPG: 1,400,000 *
- Outlet Adj. Range (PSI): 1.0 - 2.2
- Outlet Set Point (PSI): 2
Type: Full Size
Vent Port: 3/4" FNPT
Case Quantity: 10 Pcs.
* Based on 10 PSIG inlet pressure & 20% droop.
These 2 PSI service regulators are used to reduce outlet pressures from first stage regulators (normally 10 PSI) to a nominal 2 PSI. 2 PSI service regulators are used in conjunction with an LPG line regulator either at the indoor appliance or a remote manifold distribution header inlet. All MEC Full Size 2 PSI service regulators are white with black adjustment caps. Our 2 PSI service regulator vents have 3/4” FNPT tapped vents and our exclusive E-Z grip screens located over the inlet. All MEC 2 PSI service regulators feature a stainless steel inlet filter screen to reduce debris from passing through the regulator. The MEGR-1652E series offer optimal relief performance that well exceeds UL test requirements. All MEC Excela-Flo domestic regulators feature a 25 year recommended replacement life and our exclusive tear away leak check adhesive sticker.
MEGR-1622E Series: Offers a full size high capacity molded lip fabric reinforced diaphragm, stainless steel internal components, fluorocarbon (FKM) seat discs, precision machined aluminum orifices, and an adjustment range from 1.0-2.2 PSI (factory set @ 2 PSI) providing superior downstream regulation and maximum corrosion resistance against weather or contaminated gas.
Specifications:
• Type: Second Stage 2 PSI.
• Max. Inlet Pressure: 10 PSIG.
• Exterior Finish: White Powder Coat.
• Interior Finish: White Powder Coat.
• Orifice Size: .219”.
• Diaphragm: Fabric Reinforced NBR/Molded Lip O-Ring Bonnet Body Seal.
• Relief Type: Internal Relief - Spring Loaded.
• Bonnet/Body Material: Die Cast Aluminum.
• Seat Material: Fluorocarbon (FKM)
• Listings: UL LISTED / UL 144.
• Mounting Holes: Standard 3 1/2” Center.
• Pressure Taps: #54 Orifice, 1/8” FNPT, Plugged (2).
• Relief Travel Stop: Molded in Adjustment Cap - Black.