- Inlet: 1/4" FNPT
- Outlet: 3/4" FNPT
- Capacity in BTU/H LPG: 950,000 *
- Outlet Adj. Range ("WC): 9 - 13
- Outlet Set Point ("WC): 11
Type: Full Size
Vent Port: 3/4" FNPT
Case Quantity: 10 Pcs.
* Based on 30 PSIG inlet pressure & 20% droop.
These integral two-stage regulators combine the first and second stage regulator set-up into one convenient unit converting full tank pressure to 11” WC. All MEC integral two-stage domestic regulators are gray indicating low outlet pressure. Integral two-stage regulators are recommended for installations with short piping distances, but provide the same advantages of two-stage regulation with a single unit. All MEC integral two-stage regulator vent have tapped ports (7/16 -24-First Stage) (3/8” FNPT Second Stage Compact / 3/4” FNPT Second Stage Full Size) and our exclusive E-Z Grip screens located over the outlet. The MEGR-1632 series offer optimal relief performance that exceeds UL test requirements providing over pressure protection of no more than 2 PSI downstream pressure. MEC Excela-Flo integral two-stage domestic regulators feature a 25 year recommended replacement life, our exclusive Tri-Tap™ (Tank, 10 PSI, 11” WC) pressure port system and tear away leak check adhesive sticker.
MEGR-1632 Full Size Series: They feature an adjustment range from 8-14” WC (factory set @ 11” WC). Stainless steel integral components, fluorocarbon (FKM) seat discs, molded lip fabric reinforced diaphragms, and large precision machined aluminum orifices providing superior downstream regulation and maximum corrosion resistance against weather or contaminated gas. The full size MEGR-1632 diaphragm provides superior downstream regulation, has heavy duty wrench flats and a large 3/4” FNPT tapped drip lip vent to help prevent relief vent blockage.
Specifications:
• Type: Integral Two-Stage.
• Max. Inlet Pressure: 25 PSIG.
• Exterior Finish: Gray Powder Coat.
• Interior Finish: Gray Powder Coat.
• Orifice Size: .219” (Full).
• Diaphragm: Fabric Reinforced NBR/Molded Lip O-Ring Bonnet Body Seal.
• Relief Type: Internal Relief - Spring Loaded.
• Bonnet/Body Material: Die Cast Aluminum.
• Seat Material: Fluorocarbon (FKM)
• Listings: UL LISTED / UL 144.
• Mounting Holes: Standard 3 1/2” Center.
• Pressure Taps: #54 Orifice, 1/8” FNPT, Plugged (3).
• Relief Travel Stop: Molded in Adjustment Cap - Black (Full Size).