- Length: 12"
- Outlet Connection: Dielectric Male POL 7/8" Hex
- Inlet Connection: Dielectric Male POL 7/8" Hex
- Tube Size: 1/4"
These pigtail and hogtail assemblies come with two brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4” tube have a pull test rating of 500 pounds. UL LISTED and tested in accordance with UL 569.
Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.
ME1600D Series Dielectric pigtails/ hogtails are intended to isolate metallic piping from sources of electrical current and to help prevent galvanic corrosion when used on underground containers. The ME1600D dielectric pigtail/ hogtail would typically be installed at the ASME tank directly upstream of the first stage regulator prior to underground piping, isolating the underground metallic piping from electric current.